The diagram shows the fundamental details of the uniquick manifold. Through this manifold it is possible to calibrate the system flow rate and manually open and close each single circuit. To switch the heating on and off in the served area, it is necessary to intervene as in a normal system, i.e. insert a three-way zone valve controlled by a room thermostat or a chronothermostat installed in a typical room into the manifold.
If you want to set different room temperatures in each room, you must insert an electric motor controlled by the room thermostat in each on-off valve, which in this case must be provided in each room.
Conversion from meters to feet: a fast and fairly accurate system consists in scaling the drawing by multiplying the value of the unit of measurement in meters by 3.281
