3D Dino Climber

1:100 Scale dwg file (meters)
Conversion from meters to feet: a fast and fairly accurate system consists in scaling the drawing by multiplying the value of the unit of measurement in meters by 3.281


 

Dino Climber 3D, climbing game in parks equipped for children's free time.
Structure dimensions 4.75 x 1 meter

Game composed of a slide with double track in linear low-density polyethylene kneaded in rotation in the chosen color, stabilized to the color and to U.V. The unit is designed with side edges with a minimum height of 150mm., A 92 cm wide sliding surface, an outlet width of 92 cm. and a central partition. The slide has an average slope of 30 °. The structure is complete with two square floors (at different heights) formed in a single layer of carbon steel, perforated, pressure washed in a phosphated solution and followed by a primer paint in order to better adhere the subsequent non-slip coating. The ends are modeled in the terminal part so as to be perfectly adherent to the structure, to avoid the creation of spaces or entrapment. and a curved ladder.
The whole is enclosed by two shaped walls in high density polyethylene formed by compression with a minimum thickness of 19 mm. The two walls are complete with openings and steps.
The entrance armrests and the rungs of the curved staircase are covered with colored rubbery coating.
The nuts and bolts are in carbon steel with hexagonal socket head with central pin, zinc-nickel-plated with final bright chrome plating.

Recommended CAD blocks

Climbing 01

DWG

Climbing 02

DWG

Dino Climber

DWG

Climbing 03

DWG

3D ramp game

DWG

Climbing 05

DWG

3D Dino Climber

DWG

3D rope ladder

DWG